ITX Automotive M4-ATX 250W 6 – 30VDC nätaggregat (12V system)

1,050.00kr  840.00kr ex. moms

Tillgänglighet: Kan restnoteras

Artikelnr: SKU-2116 Kategori:

* Skillnaden mellan M4-ATX och M4-ATX-HV är att M4-ATX är optimerad för 12V matningsspänning (och har högre uteffekt) medan M4-ATX-HV är optimerad för 24V matningsspänning (med något lägre uteffekt). 

This is an intelligent, high power, vehicle (car / boat / electric cart) DC-DC ATX PC power supply designed for use with car pc or general purpose battery powered applications. Designed to provide power and to control the motherboards’s ON/OFF switch based on ignition status, the PSU is a wide input (6 to 34V) vehicle / car / battery operated ATX power supply capable of surviving tough car engine cranks (down to 6V) as well as transient over-voltage situations. Connect it to your car / boat / RV / solar battery and power up your PC! By using Patent Pending HyperWatt[TM] technologies, the PSU packs an impressive amount of power relative with its small footprint. The PSU has several key advantages over traditional power supplies:

– Programmable shutdown / sleep modes via optional serial cable.
– Fits any motherboard equipped with a 20 or 24pin ATX connector.
– 100% silent, fanless, no moving parts.
– Operates from 6-34V, multi-chemistry batteries supported.
– Highly efficient design, does not produce a lot of heat.
– Works with any Intel Core Duo as well as all VIA or AMD processors.

Optimized for 12V systems
– 250 Watts (300 Watts peak)
– 20/24 pin ATX, 6-30V wide input 
– Programmable timing settings via USB
– Intelligent shutdown controller
– ON/OFF motherboard control
– Survives vehicle engine cranks
– Battery deep discharge prevention
– High efficiency, 250 watts output
– “Anti-Thump” Amplifier remote control
– <1.5mA standby current
– VIA, Intel, AMD CPU support

– OSCON / POSCAP (solid polymer) capacitors, Japan

Rulla till toppen